Last updated: October 5, 2026

A smaller displayed capacity does not necessarily mean a smaller physical drive. Manufacturers describe capacity using decimal bytes, while Windows commonly displays a value calculated with binary units. Partitions, file-system structures and existing files are separate reasons why available space may be lower again.

Products discussed in this guide

These listings are comparison references, not a guarantee of price or stock. We may earn a commission from qualifying purchases.

First separate disk capacity from free space

The drive’s capacity, the size of a partition and the free space inside that partition are three different numbers. File Explorer normally shows a volume, not a complete inventory of every partition on the physical disk. Compare the model label and physical-disk capacity before treating a volume’s free-space figure as missing hardware.

One decimal TB represents 1,000,000,000,000 bytes. One GiB represents 1,073,741,824 bytes, and one TiB represents 1,099,511,627,776 bytes. Dividing the same byte count by a larger unit produces a smaller number without removing any bytes.

A worked conversion, before formatting and files

Advertised capacity Approximate GiB Approximate TiB
1 TB 931.32 0.91
2 TB 1862.65 1.82
4 TB 3725.29 3.64
12 TB 11175.87 10.91

These are calculated unit conversions, not formatted-volume measurements. File-system metadata and partitioning reduce the space available for files separately. Do not describe the unit difference as data physically lost to formatting, or subtract it a second time from a drive’s already advertised user capacity.

Check the disk layout without deleting anything

  1. Identify the physical drive by its model and capacity. Make sure you are inspecting the correct disk, particularly in a multi-drive PC.
  2. Open Windows Disk Management and inspect the complete partition map. Note data volumes, recovery partitions and any unallocated area.
  3. Compare total bytes or the expected binary conversion with the advertised capacity. A drive near that conversion is different from one with a large unexplained shortfall.
  4. Check whether a copied system image left a smaller partition on a larger drive. Unallocated space is not the same as missing physical sectors.
  5. If the physical disk itself is unexpectedly small, check the device, bridge and partitioning documentation or ask support before changing the layout.

Back up important data before resizing or converting partitions. Do not delete EFI, recovery or system partitions just to increase a displayed free-space number. Formatting cannot recover a unit-conversion difference and can erase data.

A capacity example for planning a NAS or archive

The same 12 trillion bytes expressed two ways

The WD Red Plus 12TB (WD120EFGX) is a 12TB internal drive. The advertised decimal capacity corresponds to approximately 10.91 TiB before partitioning and file-system overhead. That difference is a unit conversion, not a claim that the manufacturer removed usable sectors.

WD Red Plus 12TB (WD120EFGX) product photo
WD Red Plus 12TB (WD120EFGX). Product illustration, not a photograph of our own test setup.

This is a 3.5-inch SATA drive requiring a suitable bay, data connection and power, not a bare-drive USB or M.2 laptop upgrade. Check NAS compatibility and redundancy overhead when planning usable pool capacity. Its capacity does not replace a separate backup.

Manufacturer documentation. Model details checked October 5, 2026; confirm the selected listing and installation requirements.

Disclosure: product links are affiliate links. PCGearWiki may earn a commission from qualifying purchases, at no extra cost to you. Our assessment relies on manufacturer specifications and published listings.

Other capacity limits to investigate

Older partition schemes and USB bridges can limit how a large disk is addressed. MBR limits depend on sector size; GPT is generally the appropriate partition scheme for a modern large data disk when the operating system and device support it. Follow the platform’s conversion procedure rather than initializing a disk that already contains files.

NAS usable capacity also depends on redundancy, the file system, snapshots and the number and sizes of installed drives. Two disks in a mirror do not provide twice the capacity of one disk. A retailer’s drive capacity is not the final free capacity of your storage pool.

Frequently asked questions

Can a utility recover the decimal-to-binary difference?

No. It is another way of expressing the same bytes. A utility can change a supported partition layout, but that is a separate operation requiring a backup.

Is lower free space proof of a counterfeit drive?

No. Inspect the physical disk and partition map first. A substantial unexplained mismatch still deserves investigation; do not dismiss every shortfall as normal.

Should I buy a larger drive immediately?

Only if the workload actually needs more usable capacity after accounting for the layout. Buying another drive does not resolve a misidentified volume or an unnecessarily small cloned partition.

Sources and next steps: Seagate’s capacity explanation, CMR versus SMR for the intended workload, and why SSD endurance is a different specification.

Add PCGearWiki as a preferred source on Google